Updated Today!

We will be refreshing and re-designing our Website over the next couple of weeks. Use the “Contact Us” tab at the top or bottom of each page and we will work to get you what you need. My apologies for the inconvenience.

We would like to announce that we are working with Carolinas First Defense now producing our receiver sets. We have 11 sets in stock at the moment. Contact us with any questions. We are also discussing left hand upper receivers in both forward assist and slick side for the lefty’s and left eye dominant shooters…

WE ARE PLEASED TO ANNOUNCE A NEW RELATIONSHIP WITH A CNC SOURCE FOR MACHINING OUR CARBON FIBER HANDGUARDS. I BELIEVE THIS GROUP WILL HELP TAKE US TO THE NEXT LEVEL ALLOWING US MORE PRODUTION AND INVENTORY. ONCE WE GET THINGS FLOWING WE WILL BE ABLE TO HAVE THE TIME TO FOCUS ON NEW PRODUCT LIKE A VR80 HANDGUARD AND OTHERS.

We have our 17", 15” and 13.5” AR-15 models IN STOCK NOW. Complete 15" kit is 7.7 ounces, darn light and darn stiff. We have our proprietary M-Lok mount for our AR Pic rail section for those of you interested in front sights or transition sights.

17”, 15”, and 13.5” AR10 are IN STOCK NOW. 2.160 OD and 2.00 ID with great .080" thick wall stiffness. These are DPMS Profile. M-Lok cuts all around just like our AR15/AR9 and MPX Competition Handguards. The 2.00 ID is large enough to accommodate a bull barrel and an SLR or Superlative adjustable gas block. 17” is for 18” barrels, 15” is for 16” barrels and the 13.5” is for 14.5” barrels. This will leave a little less than 1/2” of barrel showing before the muzzle brake. Barrel Nuts are 7075 Aluminum with form thread tapping and have mil-spec Type 3 Hardcoat. NOTE: You will need the Precision Reflex DPMS AR10 barrel nut wrench or similar tool to tighten barrel nut.

We have AR9 PCC in 1 3/4” diameter IN STOCK NOW in 15”, 13.5”, and our new 12.75”. These can be modified to use those long Brekke Style Compensators with the top out exhaust ports.

We have 15" MPX Handguards IN STOCK NOW!!!!. We also have 10.25” and 8” MPX Handguards IN STOCK NOW. The 13.5" andd 12.25" are OUT OF STOCK. These MPX Handguards can also be modified to use the long Brekke Style Compensators.

We have MPX Rail Height Pic Rails IN STOCK NOW - we have a supply of MPX Pic rail that will line up with your MPX upper receiver rail. We received the first of our proprietary M-Lok mount for our MPX Pic rail section for those of you interested in front sites or transition sights. We also have a low rise for your lasers, lights, etc.…